HDBaseT Transceiver Set
2
2. Panel Description
2.1 Transmitter
Figure 2-1 Transmitter
No.
Name
Description
①
Indicators
Power: Illuminates red when power on.
LINK: Twisted Pair Link status indicator, illuminates
green when successfully connected.
VGA: Illuminates green when there is VGA signal input
DVI: Illuminates green when there is DVI signal input.
HDMI: Illuminates green when there is HDMI signal
input.
AUTO: Illuminates green under auto-switching mode.
②
FW
Micro USB port, used for firmware update.
Plug a flash disk or other storage device with update file
(MERGE.bin), and send command
50698%
to update
firmware.
③
PoC switcher
ON: Enable PoC function.
OFF: Disable PoC function.
④
SOURCE/
AUTO
Press to select one source, press again to select next
source, switching circularly between HDMI, DVI and
VGA input. The indicator of the selected input source will
illuminate green.
Long-press this button for 5 seconds or more to enter in
HDMI
LINK
DVI
VGA
FW
SOURCE/AUTO
ON / OFF
PoC
AUTO
R S232
Tx
Rx
DC 24V
HDMI
INPUTS
AUDIO
IR IN
IR OUT
OUTPUT
PoC
Summary of Contents for VL120017
Page 1: ...VL120017 HDBaseT Transceiver Set User Manual ...
Page 28: ......