HDBaseT Transceiver Set
9
4. Operations
4.1 Operations of front panel buttons
Transmitter has a channel switching button
SOURCE/ AUTO
on the front panel, through
which users can switch input source signals.
It supports both manual and auto mode. (Default: Auto switching) Press and hold the
button
SOURCE/AUTO
for 5 seconds or send command
“
50770%
”and “
50771%
”
to
switch between the two modes.
Switching modes:
Manual switching mode
Long-press the button
SOURCE/ AUTO
for 5 seconds or more to enter manual
switching mode and the green indicator
AUTO
will extinguish. Press
SOURCE/
AUTO
to switch circularly between HDMI, DVI and VGA input signal source.
When the format of VGA input signal is CVBS or YPbPr, the manual mode cannot
be switched to manual switching mode automatically.
Auto switching mode
Under manual switching mode, long-press the button
SOURCE/ AUTO
for 5
seconds or more to enter auto mode, Transmitter will automatically recognize the
signal source device that it was last connected to as input source.
4.2 RS232 Control
As RS232 can be transmitted bi-directionally between Transmitter and Receiver, so it is
able to control Receiver from local or control Transmitter from remote.
4.2.1 Installation/uninstallation of RS232 Control Software
Installation
Copy the control software file to the computer connected with Transmitter or
Receiver.
Uninstallation
Delete all the control software files in corresponding file path.
4.2.2 Basic Settings
First, connect Transmitter with all input devices and output devices needed, then to
connect it with a computer which is installed with RS232 control software. Double-click
the software icon to run this software.
Here we take the software
CommWatch.exe
as example. The icon is showed as below:
Summary of Contents for VL120017
Page 1: ...VL120017 HDBaseT Transceiver Set User Manual ...
Page 28: ......
