VivoLink VL120017, User Manual

Page: 14 / 28

HDBaseT Transceiver Set
10
The interface of the control software is showed as below:
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, and then you are able to send command in Command Sending Area.
4.2.3 RS232 Communication Commands
Communication protocol: RS232 Communication Protocol
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command Function Feedback Example
Transmitter
Setup Commands
502xx%
Set the brightness to xx. XX ranges from
00 to 99
Brightness: xx
503xx%
Set the contrast to xx. XX ranges from 00
to 99
Contrast: xx
504xx%
Set the saturation to xx. XX ranges from
Saturation: xx
Parameter Configuration area
Monitoring area, indicates if the
command sent works.
Command Sending area