28
Securing the projector
Utilizing the password function
Setting a password
1. Go to
MANAGEMENT
Menu >
Password
. Press
OK
. The password setting page
appears.
2. Select
Change Password
and press
OK
.
3. The four arrow keys ( , , , )
respectively represent 4 digits (1, 2, 3,
4). According to the password you
desire to set, press the arrow keys to
enter six digits for the password.
4. Confirm the new password by re-
entering the new password.
Once the password is set, the OSD
menu returns to the
Password
page.
5. To activate the
Power On Lock
function, press / to highlight
Power
On Lock
and press / to select
On
. Input the password again.
Note
•
The digits being input will display as asterisks on-screen. Make a note of your selected
password and keep it in a safe place in advance or right after the password is entered so
that it is available to you should you ever forget it.
•
Once a password has been set and the power on lock is activated, the projector cannot
be used unless the correct password is entered every time the projector is started.
If you forget the password
If you enter the wrong password, the password
error message will appear, and the
Input
Current Password
message follows. If you
absolutely do not remember the password, you
can use the password recall procedure.
If you enter an incorrect password 5 times in
succession, the projector will automatically
shut down in a short time.