Vivitek H9090 User Manual Download

Page: 4 / 53

H9090 Home Theater Projector - User Manual

COPYRIGHT INFORMATION

Copyright

This publication, including all photographs, illustrations and software, is protected under

material contained herein, may be reproduced without writ-ten consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The manufacturer

makes no representations or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for any particular purpose.

The manufacturer reserves the right to revise this publication and to make changes from

time to time in the content here without obligation of the manufacturer to notify any person

of such revision or changes.

About this manual

This manual is intended for end users and describes how to install and operate the DLP

projector. Wherever possible, relevant information such as an illustration and its description

has been kept on one page. This printer-friendly format is both for your convenience and

to help save paper, thereby protecting the environment. It is suggested that you only print

sections that are relevant to your needs.

Summary of Contents for H9090






















































Search results

Summary of Contents for H9090

Reviews:

Related manuals for H9090

Brands by name

Popular brands

Vivitek H9090, User Manual

Search results

Summary of Contents for H9090

Reviews:

Related manuals for H9090

Brands by name

Popular brands