12
H9090 Home Theater Projector - User Manual
REMOTE CONTROL
Status LED Power Bottons:
Use these button to turn the projector on
(
l
)
or off
(
)
.
Source Selection Buttons (1-5):
Press to select a video source. By default, these buttons are
signed as follows:
1 = HDMI 1; 2 = HDMI 2; 3 = Component 1;
4 = S-Video; 5 = Video.
However, you can assign each button to any source you wish.
Cursor Keys (▲▼◄►)
Use these buttons to select items or settings, adjust
settings or switch display patterns.
ENTER
Press to select a highlighted menu item or confirm a changed
setting.
Aspect Ratio Selection Button
Press this button repeatedly to select one of the following aspect
ratios:
16 : 9:
For viewing 16:9 DVDs or HDTV programs in their native
aspect ratio.
Letterbox:
For viewing LaserDisc movies or non-anamorphic
DVDs on a 16:9 screen.
4 : 3:
Scales the input signal to fit 4:3 sources in the center of
the screen.
4:3 Narrow:
Scales the input signal to fit 4:3 sources in the enter
of the screen when using an anamorphic lens.
Native:
Displays source image in its native resolution without
re-sizing or overscan.
MENU
Press this button to show or hide the OSD controls.
Memory Preset Buttons (A / B / C)
Press to recall settings for the current input from one of three
memory presets. By default, these buttons are assigned as
follows: A = User Memory A; B = User Memory B; C = User
Memory C.
Picture Adjustment Buttons:
Contrast (
): Press to adjust white level.
Brightness (
): Press to adjust black level.
Sharpness (SHARP): Press to adjust sharpness.
Gamma (GAMMA): Press to select a gamma curve.
Overscan (O-SCAN): Press to select an overscan mode.
Noise Reduction (NR): Press to adjust noise reduction level.
Brilliant Color (BRI-C): Press to adjust brilliant color.
Color Temperature (C-TEMP): Press to adjust color temperature.
Test Patterns (TEST): Press to activate test patterns.
1
2
4
5
3
7
6
Summary of Contents for H9090
Page 1: ...H9090 User s Manual ...
