31
H9090 Home Theater Projector - User Manual
Overscan:
Some television programs are produced based on the assumption that older
television sets may not display the outer edges of the broadcast picture area. Overscan
effectively hides these inactive, outer edges of the image. Choose one of the following:
•
Off: This setting leaves the image as-is.
•
Crop: This setting adds a mask all around edges of the source active image equal to
2.5%.
•
Zoom: This setting adds a factor to the scaling of the source active image so that the
vertical and horizontal resolutions are 105% of the size determined by the aspect ratio
function. Anything outside of the original image area is removed.
Input Select:
This function is same as the hotkey which on Remote controller. You can use
Remote controller or this function to select the correct input source
To select a video source, from Main Menu use
▲
or
▼
to highlight Input Select, then press
Enter, use
▲
or
▼
to highlight the desired source, then press ENTER.
Resync:
If the projected image becomes unstable or degraded, press
▲
or
▼
to highlight
Resync, then press ENTER. It also changes any Fine Sync setting for this timing to the
default setting.
Summary of Contents for H9090
Page 1: ...H9090 User s Manual ...
