Vivitek DU6693Z User Manual Download Page 12

Page: 12 / 61

DU6693Z DLP Projector - User Manual

UM66931217EN00

Control Panel

POWER

User the button to turn on/off the projector.

INPUT

Push the button to select the input signal. HDMI, DVI,
VGA, Component…etc.

AUTO SYNC

Implement automatic signal synchronization.

ASPECT

Change the aspect ratio of the current image and push
the button to change to the next aspect ratio settings.

MENU

Push the button to display or hide the OSD menu.

UP/Down/Left/Right

Use the button to select the OSD option.

ENTER

Use the button to select settings or confirm the changed
settings.

EXIT

Push the button to return to the menu on the previous
level or exit the OSD menu.

CENTER LENS

Push the button to center the lens and calibrate the
parameter of lens shift, focusing and zooming.
Note: The lens memory function requires the accurate
lens adjustment parameter. Please center the lens every
time after the lens is mounted.

Blank

Use the button to stop the projection temporarily.

LENS SHIFT

Use these four buttons to move the projected image to
the desired position.

FOCUS

Use the button to adjust the focus of the projected image.

ZOOM

Use the button to zoom in/out the projected image.

Summary of Contents for DU6693Z






























































Search results

Summary of Contents for DU6693Z

Reviews:

Related manuals for DU6693Z

Brands by name

Popular brands

Vivitek DU6693Z, User Manual

Search results

Summary of Contents for DU6693Z

Reviews:

Related manuals for DU6693Z

Brands by name

Popular brands