Vivitek DU6693Z User Manual Download

Page: 21 / 61

DU6693Z DLP Projector - User Manual

UM66931217EN00

Turning Off the Projector

Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and
tear to the projector.

Note:



Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing

so can cause damage to the AC IN connector of the project or the prong plug of the power cable. To turn
off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.



Do not turn off the AC power supply within 10 seconds after making adjustment or changing the setting.

Doing so is possible to cause loss of adjustments and settings and return to default.

Refer to the following guide to shut down the projector.
1. Press the POWER button on the control panel or OFF

button on the remote control once, the Power Off window
displays.

2. Press the POWER button again on the OSD control panel

or remote control to verify power off, the power LED
flashes orange after Power Off is confirmed.

3. The projector enters Standby mode when the power LED

lights red.

4. Press the Main Power switch to the off position (O) to turn

off the projector.

Summary of Contents for DU6693Z






























































Search results

Summary of Contents for DU6693Z

Reviews:

Related manuals for DU6693Z

Brands by name

Popular brands

Vivitek DU6693Z, User Manual

Search results

Summary of Contents for DU6693Z

Reviews:

Related manuals for DU6693Z

Brands by name

Popular brands