E
70
Power off time
If the ViviCam 3826 remains unused for a specified period of time while the camera is powered
on, the camera will switch to an "idle" mode, and eventually turn itself off to conserve the power.
Inactivity period
Inactivity period
Camera Status
(Batteries)
(AC Power Adapter)
60 seconds
60 seconds
Stay Idle
3 minutes
30 minutes
Shut Off
If the camera is idle, re-activate the camera by pressing any button or rotate the mode dial. If
the camera has powered-off then you must turn the camera on again by sliding the
POWER
switch. To change the power saving interval when the camera is charging with batteries,
press / button in the main menu or press / button to enter the submenu and choose
the setting. After the setting is set, press the
OK
button to confirm.
[3 min], [5 min], [10 min], [30 min], [Off]
The ViviCam 3826 defaults to [3 min].
Set to defaul
t
If you wish to restore all ViviCam 3826 settings to their original
factory status, select this option and then press the
OK
button.
Then select [ No] or [Yes] by using the / button and then
OK
button to confirm.
