vividtouch VTE-3200 Installation & Operation Manual Download

Page: 65 / 68

Appendix II: Installing a Wall Mount

Follow the manual instructions for the type of mount you have selected. Refer all servicing to qualified service personnel.

Moving the display requires at least two people.

Before installing, please make sure the wall is strong enough to hold the necessary weight of the display and the mount.

Step1.

Keep the display facing the ground and place it on a flat object.

Step2.

Remove the 4 screws (M8*15) from the back of the display.

Step3.

Align the wall brackets with the mounting holes and attach the brackets to the display using the screws removed in

Step 2.

Caution: Longer screws will damage the display.

Remove the 4 screws from
back of the display

Use maximum 15mm/0.59” long screws.
8mm Metric

Summary of Contents for VTE-3200





































































Search results

Summary of Contents for VTE-3200

Reviews:

Related manuals for VTE-3200

Brands by name

Popular brands

vividtouch VTE-3200, Installation & Operation Manual

Search results

Summary of Contents for VTE-3200

Reviews:

Related manuals for VTE-3200

Brands by name

Popular brands