vividtouch VTE-3200, Installation & Operation Manual

Page: 11 / 68

11
1. Introduction
About This Manual
This Owner’s Manual describes how to install, set up and operate the VIVIDtouch Series LED Display.
Throughout this manual, the VIVIDtouch Series LED Display is referred to as the “display”
Target Audience
The manufacturer has prepared this manual to help installers and end users get the most out of the display.
The manufacturer has made every effort to ensure that this manual is accurate as of the date it was printed. However,
because of ongoing product improvements and customer feedback, it may require updating from time to time.
Textual and Graphic Conventions
Text Conventions: The following conventions are used in this manual, in order to clarify the information and instructions
provided:
• Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press EXIT to return to
the previous menu.”
• Computer input ( commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-
width) type; for example: “To change the aspect ratio to Letterbox, type 07 00 02 41 53 50 03 08 <Enter>.”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the
following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>. <Enter> indicates that you may press either the
RETURN or ENTER key on your keyboard if it has both keys.
• In addition to these conventions, underlining, boldface and / or italics are occasionally used to highlight important
information, as in this example:
NOTE
A carriage return must be used after eac h command or string.