Vivax WMH-2000L, User Manual

Page: 66 / 92

ENG
VIVAX
9
Function operation (ONLY by remote control)
Note : During the operation, please make sure the remote transmitter aim at the remote
receiving area on the heater.
1. Press “ “
Power
button to switch on the unit. Fan will
start with work and Display will show as the figure.
2. Press “ “
Heating
button again, the unit turn on in low heating mode (1000W) and
the indicators “
I
” light on and diisplay shows
“- -
”. (Figure A)
Press “ “
Heating
button again, the unit turn on in high heating mode (2000W)
and the indicators ”
I II
” light on and diisplay shows
“- -
”. (Figure B)
Press “ “
Heating
button third time, heating function will switch off, unit will be in
fan mode only (Figure C).
Note: The Timer button “ “ on the remote control has the same function as the
Timer button on the unit cabinet.
Set current TIME/DAY (can set under standby & working mode):
3. Press ” “
SET
button for one time, the display shows ”
12
“ as default, press“ /
“ to set current hour (total 24hours); press “ “
SET
button again, the display shows
minute “30“, press” / “ to set current minute, then press “ “
SET
button for
third time, the display shows the day “ ”, press “ / “ to set current day (Monday-
Sunday: d1-d7). Then press ” “
OK
button to confirm the setting, the display will
show previous settings.
For example : Setting to Wednesday, 9:30 AM under 25°C under II heating, pls. refer to
the following photos
Note : Above setting Time/Day will keep as long as main switch is in on position or stand
by mode (no any power cut).
To check current Time/Day set, you can press “ ” SET button.
A B C