Vivax WMH-2000L, User Manual

Page: 65 / 92

VIVAX
ENG
8
OPERATING
Install the heater on the wall, at least 100 cm away
from the oposite wall and any other objects such as
furniture, curtains or plants.
(Make sure the power supply corresponds to the one
on the rating label)
1.
Plug the Power cord into wall socket.
2. Press the Main switch 0/1 into position 1.
Display will show “
S
”
3. Once press
F
button, unit enter into fan mode, the two indicators light on
and display shows ”
- -
“ . (Figure A)
Press
F
button again, the unit turn on in low heating mode (1000W) and the
indicators “
I
” light on and display shows
“- -
”. (Figure B)
Press
F
button again, the unit turn on in high heating mode (2000W) and the
indicators ”
I II
” light on and display shows
“- -
”. (Figure C)
Press
F
button fourth time, enter into standby mode (fan will turn off in below of 30
seconds).
4. Press ” “
Timer
button to set timer (00-12 hours).
Pressing the button one time increases one hour timer.
After setting the time, the display will show current time
setting for 5 seconds, then resume to previous
display, meanwhile the ” “ light on. Below photo is
an example of setting 8h.
5. Appointment “ON”
In standby mode, press “ “
Timer
button, you can set
the appointment turn-on time in 00-12 hours. After
complete setting, the display shows the appointment
turn-on time and also the Timer light ” “ is turn on.
The display automatically decreases 1 hour for each
hour passed. When the appointment power-on time
reached, the product will automatically turns on. The default setting temperature is
23°C during appointment turn-on. Below photos is an example to set appointment
turn-on time to 8 hours:
Note : If not setting the temperature and weekly program, the unit will automatically turn-
off after continuous working 12 hours, and enter into standby.
A B C