Vivax ACP-18CH50GEI, Service Manual

Page: 22 / 47

Disassemble Electric box
Tube sensor
Plugging connector
Clasp
unplug the plugging connector of the
indoor motor at the electric box, use
screwdriver to unscrew the screw fixing
the electric box and remove the electric box.
Disassemble cross flow fan
Take out motor, then remove the cross flow fan
from the left bearing holder. Refer to Fig.7-27
Bolts
Motor
Cross flow fan
Disassemble Evaporator
Use a screwdriver to loosen the screw (1pc) of left side,
(2pcs) of right side. Take out the evaporator with your
hands, so that the side plate clamp of evaporator falls
out from the groove. Remove the evaporator with care.
Take care to protect the connecting pipe.
Screw
Screw
Screws
Motor right clamp
Disassemble Motor
Use a screwdriver to loosen the 3 screws fixing the motor
clamp. Remove the motor clamp.
Unscrew the tighten nut which fix cross flow fan, then
can take out the motor from the cross flow fan.