Vivax ACP-12CT35GEEI, User Manual

Page: 140 / 152

Installation of indoor unit
INSTALATION INSTRUCTIONS
1 .Preparation
• Open the front panel, remove the 4 screws and dis-
mount the front grille while pulling it forward.
• Follow the arrows to disengage the clasps on the front
case to remove it.
• Follow the procedure below when removing the slit
portions.
I
For Moldings
i
Remove the pillars. (Remove the slit portions on the bottom
frame using nippers.)
■ For Side Piping Remove the pillars.
1)Remove the 7screws.
2)Remove the upper casing (2 tabs).
3)Remove the left and right casings (2 tabs on each side ).
4)Remove the slit portions on the bottom frame and casings
using nippers .
5)Return by following the steps in reverse order(3>2> 1
2.Installation
• Secure using 6 screws for floor installations.(Do not forget to secure to the rear wall.)
• For wall installations, secure the mounting plate using 5 screws and the indoor unit using 4 screws
3 tabs
Remove 4 screws
Open the front panel
Remove 7 screws
Remove the pillar
Casing
Front
grille
Remove
front grille
Front panel
3)Side
casings
Bottom frame
Casing
Remove the pillar
Casing
Remove the pillar
3)Side
casings