Vivax ACP-12CT35GEEI, User Manual

Page: 127 / 152


Remote controller description
1
ON/OFF
Press this button to turn on the unit .Press this button again to turn off the unit
2 -
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly
decreases set temperature. In AUTO mode, set temperature is not adjustable
3
+
Press this button to increase set temperature.Holding it down above 2 seconds rapidly
increases set temperature. In AUTO mode, set temperature is not adjustable
4
MODE
Each time you press this button,a mode is selected in a sequence that goes from AUTO,
COOL,DRY,FAN,and HEAT, as the following.
AUTO ► COOL ► DRY ► FAN ► HEAT
* *Note:Only for models with heating function
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not
be displayed
on the LED of the indoor, and the unit will automatically select the suitable operation mode in
accordance with the room temperature to make indoor room comfortable
5
FAN
This button is used for setting Fan Speed in the following sequence:
6
SWING
Press this button to set up &down swing angle, which circularly changes as below:
This remote controller is universal, If any command is sent out, the unit will
carry out the command as
indicates the guide louver swings as:
7
I FEEL
Press this button to turn on I FEEL function. The unit automatically adjust temperature
according to the sensed temperature. Press this button again to cancel I FEEL function
8
Press this button to achieve the on and off of healthy and scavenging functions in operation status.
Press this button for the first time to start scavenging function;
LCD displays . Press the button for the second time to start healthy and scavenging functions
simultaneously; LCD displays and Press this button for the third time to quit healthy
and scavenging functions simultaneously. Press the button for the fourth time to start healthy
function; LCD display Press this button again to repeat the operation above.