Vivax ACP-09PT25AEG, User Manual

Page: 245 / 308

ENG
VIVAX
23
Wireless operation (on some models)
Used to initiate the wireless connection mode. For the first time to use
wireless function, press the POWER button for 3 seconds to initiate the
wireless connection mode . The LED DISPLAY shows 'AP' to indicate
you can set wireless connection. If connection (router) is successful
within 8 minutes, the unit will exit wireless connection mode
automatically and the wireless indicator illuminates. If connection is
failure within 8 minutes, the unit exits wireless connection mode
automatically. After Wireless connection is successful, for some models
you can press MODE and UP (+) buttons at the same time for 3 seconds
to turn off Wireless function and the LED DISPLAY shows 'OF' for 3
seconds, press MODE button and UP(+) to turn on Wireless function
and the LED DISPLAY shows 'On' for 3 seconds.
NOTE: When you restart the wireless function, it may take a period of time to
connect to the network automatically.
CONSTANT FAN operation
In cooling or Dry mode, press the MODE button for 3 seconds to turn on or
off the constant fan function. When the function is turned on, the constant
fan light will illuminate, identifying the fan continuous run for cooling. When
the function is turned off, the constant fan light will go out, identifying the fan
cycle run with compressor stop.
FRESH operation (on some models)
Press MODE and DOWN (-) buttons at the same time for 3 seconds to
initiate FRESH feature and the FRESH light illumiantes on some models, the
LED DISPLAY shows 'On' for 3 seconds. The ion generatoris energized and
will help to purify the air inside. Press it for 3 seconds again to stop the
FRESH feature and the FRESH light turn dark on some models, the LED
DISPLAY shows 'OF' for 3 seconds for some units.