Vivax ACP-09CH25GEH, Service Manual

Page: 46 / 79

Operating Procedures / Photos
7. Disassemble Axial Flow Fan
Unscrew the nut fixing the fan with a spanner to
take out the fan.
8. Disassemble Outdoor Motor
Unscrew the screws fixing the motor support, and
then lift it upwards to remove it. Unscrew the
screws fixing the motor and pull out the connec-
tion line between it and electric box to remove it.
Only for cooling and heating unit
Unscrew the fixing nut of the four-way valve coil
and remove the coil. Wrap the four-way valve with
wet cotton and unsolder the 4 weld spots con-
necting the four-way valve to take it out. Welding
process should be as quick as possible and keep
wrapping cotton wet all the time. Be sure not to
burn out the lead-out wire of compressor.
9. Disassemble Four-way Valve
Nut
Axial Flow
Fan
Motor
Terminal Screw of Motor
Motor Support
Screws
Four-way valve
Soldered point