Vivax ACP-09CH25GEH Service Manual Download Page 30

Page: 30 / 79

Front Panel

(12) Disassembly procedures for indoor unit

1. Disassemble the front panel, filter

Filter

Bend the guide louver so that the movable

lock of guide louver is released to remove the

guide louver.

2. Disassemble the guide louver

Screws

Operating Procedures / Photos

Guide louver

Open the 2 screw covers at the front case and

screw off 4 screws. Pull out the movable latch at

the front case with hand and then pull it back-

wards to disassemble the front case.

3. Disassemble the front case

Screws

Open the front panel, push the filter upwards to

unloose the clasp, and then pull out the two filters.

Screw off one screw on the displayer box, take

down the guard board then disconnect the displayer

connection wire, can take down the front panel.

Summary of Contents for ACP-09CH25GEH
















































































Search results

Summary of Contents for ACP-09CH25GEH

Reviews:

Related manuals for ACP-09CH25GEH

Brands by name

Popular brands

Vivax ACP-09CH25GEH, Service Manual

Search results

Summary of Contents for ACP-09CH25GEH

Reviews:

Related manuals for ACP-09CH25GEH

Brands by name

Popular brands