vLoc3 RTK-Pro Quick Start Guide V1.0
Page 8 of 9
When taking readings that are recorded in the log or sent to the cloud, there is an extra action to be taken. The locator can provide cm
mapping accuracy. For technical reasons the GNSS antenna is positioned slightly ahead of the locator. This displacement is compensated
for by tilting the locator backward until the antennas are vertically aligned.
Procedure to log a point
Locate the line in the usual way (See vLoc3-Pro User manual)
Press the Info key. The following screen should be shown:
Press the “+” key to log the data. The log number will increment indicating that the log is stored but then a new screen will
be shown as
below.
This has the addition of a spirit level. Pressing the Info key will take you back to the locate screen, but if you wish to record a log with the
antenna displacement removed, tilt back the locator until the bubble is centralised in the spirit level.
After a second or two the compensated reading will automatically log and the log number will increment, as below then the display will
automatically revert back to the locate screen:
