vLoc3 RTK-Pro Quick Start Guide V1.0
Page 7 of 9
“Cloud Status” will then show:
“Connecting”,
“Sending Log”,
“Log sent OK”
as the RTK-Pro sends the logs using the received authentication and survey ID to the VXMT VMMAP Cloud server.
The progress bar will fill as logs are sent to the Cloud.
Subsequent logs generated in the same survey will just be sent to the Cloud as above without the need to request the region, request
authentication, or request a survey ID.
If a new survey is started and new logs taken, then a new survey ID will be requested before the logs in the new survey are sent to the
Cloud.
Using the vLoc3 RTK-Pro
The use of the RTK-Pro to locate services is very similar to locating with a vLoc3-Pro which is covered by that user manual.
However, the user should note the following.
The Status Bar contains information relating to Cellular and GPS (GNSS) connectivity as below:
