5 Loc-10TxSIS Transmitter
Page 34 of 57
4. Press "f" pushbutton to select the second frequency and exit the submenu to return to the main display.
5. In the main display screen, both frequencies are displayed. The frequency will toggle between the two
chosen frequencies.
NOTE
If user is changing the selected frequency by pressing the "f" pushbutton, this
mode will be deactivated. To reactivate it, user has to follow again the above
procedures.
If the unit is powered down, this mode will be reset. To activate it again after
power up, user has to follow the above procedures.
5.4 Information
When the “i” (information) pushbutton is pressed, the display will show the volume level of the audio; use the
“+” and “-” pushbuttons to increase/reduce the volume or turn the beeper off (off – low – medium – high).
By pressing the “i” (information) pushbutton the display can be toggled to show “voltage” and “resistance”.
The display indicates mA, as the default, and volts or ohms when selected.
Pushbutton
Pushbutton
Pushbutton
[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292 | Phone: 800-WCT-PROD (800-928-7763) | Fax: 310-306-9343
