4 Data Logging
Page 18 of 57
http://www.trimble.com/pathfinderproxt_ts.asp?Nav=Collection-32840
Connect the Trimble ProXT to your computer either by setting up a Bluetooth connection or by using the
RS232 lead supplied.
Launch the application and switch on the GPS. When connection is achieved a little satellite icon will appear
in the middle of the top bar.
1. From “Skyplot” select “Setup”.
2. Now select “GPS Settings”.
3. Select COM1 and set the parameters as below and then press OK.
4. Now select the spanner on the “NMEA Output” line.
[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292 | Phone: 800-WCT-PROD (800-928-7763) | Fax: 310-306-9343
