4 Data Logging
Page 22 of 57
4.4.4 Software
Update
1. With the locator switched on and connected to the computer, click on the “Software Update” tab.
2. A screen similar to the one below should be shown.
3. If connected to the Web, press the “Get latest swrev” button. Alternatively, if the software revision
required is already saved, use the “File” button to browse to the relevant file.
4. Click on the “Download” button. The progress bars below will start to activate showing the progress of the
software installation. When it is complete a message “software upload complete” will be shown both on
the computer and locator screen.
5. Note that the new software will not be active until the unit has been switched off and on again.
4.4.5
Advanced Configuration Tool
Clicking the “Advanced” button allows the user to configure the instrument to specific requirements.
The extra features available are:
Switch on or off user menu settings
Switch off frequency selections
[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292 | Phone: 800-WCT-PROD (800-928-7763) | Fax: 310-306-9343
