i5000 Receiver - Operations Manual
25 / 45
©Metrotech Corporation 2006 – All Rights reserved
5.2.1.1
Recharging the Battery
The battery pack can be recharged while seated inside the receiver body. To recharge the
battery pack:
1. Make sure recharging of the receiver battery occurs at room temperature. Charging the
battery at low and high ambient temperature will affect how many charge cycles the
battery can withstand and might cause other battery damage.
Excess heat can damage batteries, causing a rupture or ignition. Do not place
batteries near fire, heat, or in direct sunshine.
2. Attach the i5000 mains power supply to the charging jack of the Li-ion battery pack.
3. Plug the power supply into the electrical outlet.
4. The recharging time for a fully discharged battery pack is approximately 8 hrs.
The battery pack can also be recharged via the 12VDC vehicle adapter.
Do
NOT
attempt to recharge non-rechargeable AA-Cell batteries. Damage to the
receiver will occur.
Batteries contain hazardous material that may be harmful to the environment.
Dispose used batteries sensibly. Follow local recycling guidelines for disposal of
similar material.
