i5000 Receiver - Operations Manual
19 / 45
©Metrotech Corporation 2006 – All Rights reserved
When the i5000 receiver data logging option is activated, the operator may press the <Mark> soft
key to mark a particular data point as a valid entry into the log file. Depth measurements only
taken to help the operator understand the field conditions of the locate site should not be marked
using the <Mark> soft key.
Figure 4-11 Data Logging Depth Measurement Interface
4.6 Wireless Connection
The
i5000
is equipped with Bluetooth
®
wireless transmission. When active (either incoming or
outgoing), a blue LED emits from the receiver’s top right corner. This can indicate that a
Bluetooth camera phone is currently connected and transferring data to the receiver or that the
PC host is connected.
If other locating devices, such as i5000 transmitters, have been retrofitted with a Metrotech
Bluetooth interface module, the
i5000
receiver may interact with these devices. These “paired”
devices will interact with the receiver within the 30 ft. range capability.
The transmitter’s software can be updated and maintained with access to Metrotech’s web
service, MyLocator, and the Bluetooth wireless interface.
