i5000 Receiver - Operations Manual
13 / 45
©Metrotech Corporation 2006 – All Rights reserved
In manual gain mode, the signal strength indication is switched to a higher resolution linear scale
ranging from 000 to 999. The dB signal strength indication remains shown on the right hand side
of the display.
Figure 4-2 Manual Gain Mode Interface
As the peak position is identified and the receiver is used in a swinging motion, the peak
position is displayed graphically by the green bar graph then slowly decreases as the signal
strength changes.
Figure 4-3 Peak Position Graphical Bar Display
4.2 Frequency
The active frequency, or the passive band name (power or RF), is always displayed on the top
left of the
i5000
receiver display. When the frequency soft key is used to change frequency, the
display is updated as well.
The active frequencies available are below. Please contact Metrotech for extended or special
frequency sets.
Region Frequency
(Hz):
North
America
Direct: 491, 982, 8.44k, 9.82k, 35.4k, 82k, 83k
Passive: 50, 60, 100, 120, RF
International
Direct: 491, 512, 577, 640, 982, 8.192k, 8.44k, 9.82k, 35.4k, 65.5k, 82k, 83k
Passive: 50, 60, 100, 120, RF
