ELECTROMAGNETIC COMPATIBILITY (EMC) TABLES
Table 2 (Part 2)
Immunity Test
IEC 60601 Test Level
Compliance Level
Electromagnetic environment – guidance
Field strengths from mixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM
radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF
Transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which Fever Scout is used exceeds the
applicable RF compliance level above, Fever Scout should be observed to verify normal operation. If abnormal performance is observed, additional
measures may be necessary such as re-orienting or relocating Fever Scout.
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to 2.5 GHz
3 V/m
Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter
manufacturer and d is the recommended
separation distance in meters (m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey,
should be less than the compliance level in each
frequency range.
Interference may occur in the vicinity of equipment marked
with the following symbol:
1
1
21
