Vitrolux H
V2
Maintenance
Stand 5/12
Page 41 of 57
5.1 General information
Complete all maintenance work according to schedule (once a
year) and document the work completed in an operation logbook.
To perform the maintenance, switch on the machine and drive all axes to their starting
position.
Open the door by pressing the button "Cover".
Now turn off the machine and unplug in addition, to prevent an accidental switching.
Warning
Switch off the power supply before starting any maintenance work (turn the main
switch on the system cabinet to OFF and unplug the power plug)!
When the maintenance work is completed, check all the safety equipment is fully functional.
Handle and dispose of substances and materials used properly, particularly in respect of
lubricants and solvents.
5.2 Maintenance work and intervals
5.2.1 Fixed intervals
Once a year
Grease motor axles and guide rails
5.2.2 Mantenance work as necessary
as necessary
Clean cooling system fans
Clean cooling fan of PC (if any)
Clean interior of the system
Clean optics
