Vitrolux H
V2
Safety
Stand 5/12
Page 14 of 57
1.3.4 Assembly and disassembly
Only personnel involved with the assembly and disassembly work may be in the vicinity of
the laser system during assembly and disassembly. Others (e.g. spectators) must be kept
outside the laser zone.
Ensure the load-bearing capacity of the ground is sufficient.
During assembly and disassembly work, also ensure the stability of the laser system and its
components.
Following assembly, check all the parts are properly connected and that all connection
cables and lines are correctly attached. When the cable and line layout is on the floor, ensure
it is done in a way to minimize the risks of tripping.
Before starting the laser system, the personnel responsible for switching it on must be sure
that the system is in perfect condition by carrying out the prescribed checks and controlling
sample production!
1.3.5 Transport and assembly
Only transport the Vitolux E / F in a standing position. Observe the transport and storage
information provided on the laser system packing material
Caution
Transport the laser system carefully without the packing. Avoid vibrations
and the use of force. The cooling water must be drained off. Risk of damage.
Before transporting the laser system, pack the components carefully (e.g. applicable sea
freight cases, drying agents). The following transport systems are permitted:
Rail
Ship
Truck with pneumatic suspension
Fork-lift truck (for transporting the laser system and components on pallets)
The base must have a load-bearing capacity of at least 300 kg/m²
².
The laser system may only be installed in locations which:
are not exposed to extreme vapors from oils, solvents or cleaning agents
are free of dust
are not potentially explosive
are clean
are not subject to vibration.
1.3.6 Storage
The laser system must be kept dry and in an upright position when stored.
