Vitrolux H
V2
Safety
Stand 5/12
Page 15 of 57
1.3.7 Maintenance and repair
Carry out all the prescribed maintenance work according to the maintenance schedules.
Disconnect the power supply before beginning any maintenance or repair work (switch the
main switch in the to OFF and unplug the mains connector).
If maintenance work must be carried out with the system in operation, the operating panel
must be supervised by an additional person. Damaged parts must be replaced immediately
by perfect, original parts.
Check the functionality of all the safety equipment after completing maintenance and repair
work. Handle and dispose of materials and substances used properly, particularly lubricants
and solvents.
1.3.8 Safety when out of service
Secure the laser system against unauthorized activation during periods out of service (e.g.
by inserting a padlock in the main switch).
Ensure that children have no access to the laser system. Never allow children to play on or in
the laser system.
1.3.9 Electrics
A voltage up to 5 kV is required to generate laser pulses.
Parts conducting high voltage are electrically insulated.
Warning
Never remove or damage the insulation. Never touch electrically conductive
parts. Never access parts conducting high voltage. Risk of fatal injury.
The following parts conduct such high voltage:
Q-switch laser connections in the laser head,
High voltage power lines in the laser power supply,
Connection lines between laser head and laser power supply
Other system components (e.g. control, scanner, power supply) have a 230 V power supply.
Warning
Never touch parts conducting voltage. Risk of fatal injury.
Work on the power supply system and control may only be carried out by a suitably trained
electrician. Observe locally applicable safety regulations when working on equipment
conducting mains power or high voltage.
Always disconnect the power supply before starting work on the electrical System!
Do not simply rely on the fact that the power supply is disconnected, check for yourself by
taking the necessary measurements.
