VITRA Tyde 2, Instructions For Use Manual

Page: 11 / 15

EN
22
Error code Cause Solution
E01 Initialisation Reset the unit.
E02, E028
Overload when
moving up
1. Move your table down more than 10 mm.
2. Your table will now be able to move up and down normally again.
E02, E029
E41-E52
Overload when
moving up
1. Remove all loads from the table.
2. Do not activate the table for 18 minutes.
E03
E41-E52
Overload when
moving down
1. Remove any objects that might be blocking the table and preventing it
from moving down.
2. Do not activate the table for 18 minutes.
E16
button pressed
accidentally.
1. The E16 error code only appears for as long as the button is held down.
2. Your table will now be able to move up and down normally again.
An E and another error
code appear on the
display.
Internal error Contact your Vitra retail partner.
E40
Overloading while
the table is being
raised or lowered
1. The E40 error code only appears for as long as the button is held down.
2. Your table will now be able to move up and down normally again.
E53-E64 Collision
1. Remove any objects that might be blocking the table.
2. Do not activate the table for 18 minutes.
If an error code is dis-
played for a long time or
an error occurs regularly.
Internal error
1. Unplug the power cable.
2. Contact your Vitra retail partner.
Error codes may be displayed. Error codes appear on the display only when a key is pressed. The display flashes.
Troubleshooting /display
(DPG1C02-000006)