EN
19
Table height
/limitation
(DPG1C02-000006)
Setting the upper limit
Move your table to the maximum permissible height.
Press and the handset up for 8 seconds until the
light flashes.
Release and the handset.
Setting the lower limit
Move your table to the minimum permissible height.
Press and
simultaneously press the handset down for 8 seconds
until the light flashes.
Release and the handset. The table height limit
can only be deactivated using the
reset to factory settings.
Favourite position
/delete
(DPG1C02-000006)
All positions are deleted
Press for 8 seconds
After 5 seconds, the display shows a countdown and the light bar
flashes red when all favourite positions are deleted.
Favourite position
/save
(DPG1C02-000006)
You can assign four saved positions.
After 4 positions have been saved, these positions can be
overwritten.
The next time you save a position, the closest position will be
overwritten.
Move your table to the desired position.
Press for 2 seconds.
The light bar will flash white twice to indicate that the position is
being saved. The light bar lights up white to indicate that the
position is being saved.
The display shows the saved position with a
and a position number. The number next to it indicates the order in
which the positions are saved.
Favourite position
/height adjustment
(DPG1C02-000006)
To move your table to a saved favourite position, press the
handset in the direction you want your table to move. The table
will automatically stop at the next saved position. If you continue
to hold the handset down, your table will move to the next saved
position.
Table height
/display adjustment
(DPG1C02-000006)
If the height shown on the display is not correct, it
can be adjusted.
Press at the same time for 5 seconds -
display height flashes
Press the handset up to increase the height and
down to decrease the height.
Press any button to confirm the height or wait 10
seconds. Confirmation is automatic.
Summary of Contents for Tyde 2
Page 15: ... ...
