MAINTENANCE OF BATHTUBS
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
10
Problem
Solution
• The surface of the product is dull and/or
scratched.
• If you force the control handle too much the siphon wire could break. Therefore
height adjustment should be made by turning the plug counter clock wise without
forcing the handle.
• Hair, soap, etc. could clog the siphon in time. Clean the siphon drain with a drain
opener from time to time.
• Check the silicone application between the bathtub and the wall
• Check if the Wall hangers are installed on the wall or not.
• The wall hangers must be used in order to preserve the rigidity of the bathtub
• If your product is new, the protective film layer on it might not have been
removed.
• If dullness/scratches occur after a certain period of use, you may be using
incorrect cleaning materials. See the 'Cleaning’ section.
• My bathtub stretches
• Water leakage under the bathtub
• The siphon drain of my bathtub clogs frequently.
• The siphon plug does not open even though the
control handle is forced.
If your problems persist please contact the nearest VitrA-Artema Authorized Service.
MATTERS THAT REQUIRE ATTENTION!
• Acrylic is durable against acids and alkalines.However do not let organic solutions used in dry cleaning, paint remover substances,
acetone or other solvents to your compact system.
• Keep lighted cigarettes away from the product.
• If the construction activities in the bath will continue after installation, do not remove the folio layer on the product and apply full
protection to the product.
CLEANING THE ACRYLIC BATHTUBS
• Right after you use your bathtub, clean it with a liquid bath cleaner or a decalcifier and a soft cloth and warm water. Otherwise
unwanted soap products, dirt and hard water will create a thin layer on the acrylic surface and it will become more difficult to clean.
• Do not use hydrochloric acid, abrasives, powdered detergents and cream detergents that contain powders, soft soap and
hard/scratching cleaning sponges for cleaning your bathtub.
Note:
When products with cabins, particularly patterned products are concerned, clean the glasses with a soft cloth and warm water.
Do not use hydrochloric acid, abrasive / powdered / liquid detergents soft soap or hard/scratching cleaning sponges. Do not let organic
dilutions, paint removers, acetone and other solvents contact the glass.
