VITO AUTO VICO230V, Instruction Manual

Page: 22 / 32

22
EN
FAQS / TROUBLESHOOTING
Problem - Cause Solution
The engine doesn’t start:
� Non-existent supply voltage;
� Too low supply voltage;
� ON/OFF switch in position (0);
� The fuse has burned out due to overcharge;
� Check the power cable, connexion plug, socket and
circuit protection breaker;
� Avoid too long extension cords;
Use an extension cord with enough transversal section;
� Place the ON/OFF switch in position (I);
� Replace the fuse;
17
We declare under our exclusive responsibility, that the
product Meets the following standards or standardisation
documents: EN 50498:2010, IEC 62321-2:2013, IEC
62321-1:2013, IEC 62321-3-1:2013, IEC 62321-5:2013,
IEC 62321-5:2013, IEC 62321-4:2013, IEC 62321-7-
1:2015, IEC 62321-7-2:2017, ISO 17075-1:2017 and IEC
62321-6:2015 according to the determinations of the
directives:
2014/30/EU - Electromagnetic compatibility directive;
2011/65/EU - ROHS Directive;
S. João de Ver, 19 de December de 2017
Central Lobão S. A.
Responsible for the Technical File
The warranty of this product is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty covers
any manufacturing defect in material or operating, as well
as parts and work needed for their recovery.
Excluded from the warranty the misuse of the product, any
repairs carried out by unauthorized persons (outside the
service center of the brand VITO) as well as any damage
caused by the use of it.
WARRANTY DECLARATION OF CONFORMITY