VITO AGRO VIMB15A, Instruction Manual

Page: 33 / 56

Start-up:
Turn the machine on carefully following the operating
instructions in the instruction manual. Using the petrol
water pump according to these instructions reduces the
risk of injury.
Use
Stop the combustion engine:
▪
The machine is tilted, lifted or loaded for transport;
▪
Whenever you intend to move away from the water pump
or if it is not under watch;
▪
Before refuelling the tank. Only refuel when the
combustion engine is cold;
▪
Before the equipment is inspected, cleaned or before
repair tasks are carried out.
If you lack the necessary knowledge, have the petrol water
pump repaired by a specialist.
When carrying out maintenance and cleaning work,
changing accessories and transporting the machine,
always wear gloves.
Before start cleaning, adjustment, repair and maintenance
tasks:
▪
Place the petrol water pump in a solid and flat surface;
▪
Turn off the combustion engine and let it cool down.
Allow the water pump to cool down in particular
before carrying out maintenance work on the drive
system, combustion engine, exhaust manifold and muffler.
Temperatures of 80°C or even higher can be reached.
Direct contact with engine oil can be dangerous, moreover,
engine oil must not be spilled.
VITO recommends leaving the filling or changing of the
engine oil to a specialist.
Frequently check the equipment, especially before storage
(for example, before the winter period), regarding wear and
damages.
For safety reasons, replace worn out or damaged parts
immediately so the unit is always in perfect operating
conditions.
Cleaning:
The machine must be completely cleaned after use.
Clean the engine by hand (avoid introducing water into the
air filter and exhaust). Avoid wetting the controls and other
equipment / accessories that are difficult to dry. Water
stimulates the appearance of corrosion and rust.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the water pump.
In order to prevent fire risks, the ventilation slots and
exhaust should be kept clear of grass, straw, moss, leaves,
spilled grease and other debris.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out, all other works must be
performed by an official dealer.
If you lack the necessary knowledge and resources, you
should always ask an official dealer.
Use only VITO-approved accessories for this petrol water
pump or technically identical parts. Failure to do so may
result in personal injuries or damages to the pump. If in
doubt, you should contact an official dealer.
For safety reasons, the fuel injection components (hoses,
tank, tank cap and couplings) should be checked regularly
for damage and leaks. If necessary, they should be
replaced by an official dealer.
Keep warning and information stickers always clean and
legible.
Keep all nuts and bolts well tightened in order to ensure a
safe operation.
If any components or safety devices are removed for
maintenance
works, they must be repositioned
immediately.