29
Transcendent 6 MegaPixel Fisheye Camera
After you successfully request your domain name, you will see your domain in the list.
3. Input the username, password, domain you apply for in the DDNS configuration interface.
4. Click “Save” button to save the settings.
3.5.5
SNMP
To get camera status, parameters and alarm information and remotely manage the camera, you can
set the SNMP function. Before using the SNMP, please download the SNMP software and set the
parameters of the SNMP, such as SNMP port, trap address.
1. Go to Config
à
Network
à
SNMP.
2. Check the corresponding version checkbox (Enable SNMPv1, Enable SNMPv2, Enable
SNMPv3) according to the version of the SNMP software you download.
3. Set the “Read SNMP Community”, “Write SNMP Community”, “Trap Address”, “Trap Port”
and so on. Please make sure the settings are the same as that of your SNMP software.
Note
: Please use the version in accordance with the security level you required. The higher the
version is, the higher the level of the security.
