23
Transcendent 6 MegaPixel Fisheye Camera
Alarm Out:
If selected, this would trigger the external relay output on detecting a motion based
alarm.
Trigger Snap:
If selected, the system will capture images on an alarm and save the images onto
the SD card.
Trigger SD Recording:
If selected, the recording will be triggered and saved onto the SD card
on an alarm.
Trigger Email
: If “Trigger Email” and “Attach Picture” checkbox is checked (email address
shall be set first in the Email configuration interface), the captured pictures and triggered event
will be sent to those addresses.
Trigger FTP
: If “Trigger FTP” and “Attach Picture” checkbox is checked, the captured pictures
will be sent to the FTP server address. Please refer to FTP configuration chapter for more details.
2. Set motion detection area and sensitivity. Click “Area and Sensitivity” tab to go to the
interface as shown below.
Move the “Sensitivity” scroll bar to set the sensitivity.
Select “Add” and click “Draw” button and drag mouse to select the motion detection area; Select
“Erase” and drag the mouse to clear motion detection area.
After that, click “Save” to save the settings.
3. Set the schedule of the motion detection. Click “Schedule” tab to go to the interface as shown
below.
