Transcendent 6 MegaPixel Fisheye Camera
16
3.1.4
Storage
Go to Config
à
System
à
Storage to go to the interface as shown below.
The first time you use the SD card, you should click the “Format” button to format the SD card.
Click “Pop Up” button to stop writing data to SD card. Then the SD card can be ejected safely.
F
Go to Config
à
System
à
Storage
à
Record to go to the interface as shown below. You can set the
SD card recording stream. Set the pre record time if you enable pre record. Click “Save” button to
save the settings.
Pre Record Time
: Set the time to record before the actual recording begins.
3.1.5
Set Fisheye Parameters
Before viewing the live image, please go to Config
à
System
à
Fisheye Parameters menu to set the
stream mode and installation method.
Note
: Using of SD card function should be coordinated with motion or sensor
alarm. When alarm is triggered, the system will automatically capture picture
and save the picture or recording on to the SD card.
