7
7. DNR
8. IMAGE
IRIS ELC
2-MOTOR
EXPOSURE
BACKLIGHT OFF
DAY&NIGHT
COLOR
DNR LOW
IMAGE
MOTION OFF
SYSTEM
EXIT
DNR
3D-NR (Digital Noise Reduction)
DNR function improves picture quality by filtering
out signal noise which is generated under low light
conditions. Set off, low, middle or high level. 3DNR
(3-dimensional noise reduction) which reduces
noise by multi frames. It is effective in low light. Set
to high will reduce the most noise but the image
will be less sharp and a tailing effect might occur.
IMAGE
SHARPNESS
Sets the Sharpness level 0~10. Increases or
decreases the sharpness of the picture. Too much
sharpness can make image harsh and show more
noise as well as line flicker at the edge of object in
the picture
GAMMA
Used to adjustment the monitor GAMMA value
0.45/0.55/0.65/0.75 selectable.
ORIENTATION
NORMAL / MIRROR / FLIP / MIRROR_V.
ACE
Improves the visibility for the bright areas and the
dark areas by compensating the video gain. Care
should be taken to select low, middle or high level,
because video may lose its quality in some
environments by over compensation. Video noise
can be increased in the dark area accordingly
DEFOG
Enhance foggy video according to status of scene.
Video quality can be less in normal environments.
PRIVACY
Set ON/OFF for enabling/disabling PRIVACY mask.
16 privacy areas are available and each area is
programmable in size, color, position and
transparency.
ZONE NUM
Selects mask zone number from 0 to 16 to be
adjust.
‘
ZONE DISP
Displays OFF/ON for the mask area which you
selected.
H-POS, V-POS
Adjusts the mask area H, V position which you
selected.
TRANS
Selects transparency rate for the mask area from 0
to 3
DNR LOW
IMAGE
MOTION OFF
SYSTEM
SHARPNESS
GAMMA 0.55
ORIENTATION NORMAL
FLIP OFF
ACE OFF
DEFOG ON
PRIVACY
RETURN
IRIS ELC
2-MOTOR
EXPOSURE
BACKLIGHT OFF
DAY&NIGHT
COLOR
DNR LOW
IMAGE
MOTION OFF
SYSTEM
EXIT
