ENVI Series: VTD-MV-VN / VTD-MV-VRN
9
5.3.
Connections
1. Power
Depending on the type of installations, apply power to the camera by one of the three
options below.
a) Via Ethernet – Use only with POE switch (100 Meters max distance)
b) 12VDC - Use with 12VDC 500mA
c) 24VAC- Use with 24VAC for longer distances.
2. Ethernet connection
a) Insert one end of the Ethernet cable into the network jack of your camera, and insert the
other end into the data port (samples switch, router, etc)
3. Remove the dome cover from the camera using the torx wrench
4. Removable Storage
For recording directly on the camera you will need to install a microSD card, this will allow
you to play video directly from the camera. (
Please use only class 10 microSD cards
)
a) Remove the ball gimbal from the socket, and hold the base firmly with one hand.
b) Gently squeeze point A and B and pull away from the gimbal base until the gimbal cover
is removed from the base.
c) Insert the microSD memory card as shown below. (
refer to Section 17.1MicroSD
Configuration on page 68
for instructions on Formatting)