ENVI Series: VTD-MV-VN / VTD-MV-VRN
58
•
Motion Detection:(this is only available in Primary Stream) If enabled, Motion Detection
feature is activated and user can configure the areas where motion detection function will work.
Click Check All button for whole scene to be active (grid will turn Green) then click on any box
inside scene to take out that area from Motion Detection (box will turn Red) then clickApply to
save
•
Motion Sensitivity: Set the sensitivity of motion defined in Motion Detection Area. Select
between -100 and 100. 100 is the most sensitive.
After all the settingsare done, click Apply button to save it. If Default button is clicked, all the
fields return back to original value.
DI/DO Control
Not Available on VTD-MV series
