Vitek VT-SRL User Manual Download Page 74

Page: 74 / 120

Web Viewer

what is the web Viewer?

The web Remote Viewer enables you to access the DVR remotely via a web browser.
nOTE: Vitek recommends using Internet Explorer 7.0 or later.

System Requirements

The following is the minimum hardware and operating system requirements to run web RA.

Operating System

windows XP Professional

windows Vista Home Baisc / Premium

window 7

web browsers:

Internet Explorer 7.0 or later/Mozilla Firefox 3.6/Google Chrome 4.1/Opera 10

Some web browsers other than Internet Explorer may not fully function.

CPU

Intel Pentium 4 / 2.0GHz or higher

Memory

512 MB

Display

16-bit 1024 x 768 High Color

Hard Disk Drive

50 MB (space required for installing the web viewer)
* Additional HDD space is required for saving your recording data.

The file size of your recording may differ depending on the specified quality.

Connection

Open a browser and enter the IP address of DVR, or type the DVR Address in the address bar.

To connect to the DVR from inside

Check the "network Status" and verify the

of the DVR. (page 45)

Enter the IP address and web service port in the

address bar of the browser.

Ex: http://192.168.1.200:8080

To connect to the DVR from outside

•

Using the IP address

Check the "network Status" and verify the <EXTERnAL IP ADDRESS> and <wEB SERVICE PORT> of the DVR. (page

45)

If using a static (external) IP, enter the external IP that is specified in the DVR in the address bar of the web browser.

nOTE: Contact the Internet Service Provider to determine if the external IP address is static or dynamic.

•

Using the URL

Check the "network Status" and verify the <DDnS ADDRESS> and <wEB SERVICE PORT> of the DVR. (page 45)

Enter the DDnS address and web service port in the address bar of the browser.

Ex: http://00115f123456.DVRLInK.nET:8080

If the DVR is connected to a router, you will need to make sure both the web and RTSP Service Ports are Port Forwarded to allow

access from outside. For help with Port Forwarding, refer to the router's user manual, or contact the manufacturer of the router.

Summary of Contents for VT-SRL

























































































































Search results

Summary of Contents for VT-SRL

Reviews:

Vitek VT-SRL, User Manual, Page: 74 / 120

Search results

Summary of Contents for VT-SRL

Reviews: