57
5.
System Event
you can configure the DVR to send a notifiction if a system event occurrs (i.e. an event related to the disk, recording,
network or system).
1.
From <SySTEM SETUP> - <EVEnT>, select <SySTEM EVEnT>.
2.
Use the [
▲▼◀▶
] buttons on the remote control or use the mouse to specify the reaction to each event.
3.
To apply the change, click <APPLy> in the bottom of the screen.
4.
when done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Disk
i
OVERwRITE START EVEnT : if you set the disk
write mode to <OVERwRITE>, this event occurs
when the disk is full and the overwriting begins.
i
DISK FULL EVEnT : if you set the disk write mode
to <OnCE>, this event occurs when the disk is full
(100%).
i
DISK SPACE EXHAUSTED EVEnT : Event that is
triggered if the disk is almost full.
Click to specify the threshold percentage of
usage to trigger the event.
i
S.M.A.R.T EVEnT : Occurs if the disk encounters a
S.M.A.R.T error.
i
nO DISK EVEnT : Occurs due to a disk failure or cable problem.
•
To detect the disk error, it is recommended not to change the settings of the S.M.A.R.T event, no disk event and buzzer output.
Record
i
PAnIC RECORD START EVEnT : Specify the action to perform when the panic recording begins.
System Setting