System Setting
56
\
\
Motion Sensor
you can set an action to execute when motion is detected.
To configure the motion sensor of each camera, see <CAMERA SETUP>.
1.
From <SySTEM SETUP> - <EVEnT>, select <MOTIOn
SEnSOR>.
2.
Use the [
▲▼◀▶
] buttons on the remote control or
use the mouse to specify the ignoring interval and
operation.
i
IGnORInG InTERVAL : Specify the minimum
interval of the motion event occurrence.
For example, even if you have set the minimum
frequency to 5 seconds and another motion event
occurs less than 5 seconds after the last motion
event occurred, the new event will be ignored.
Motion recording will be triggered immediately after the
motion occurred regardless of the above settings.
i
ALARM OUTPUT : Enables the alarm output if motion is detected by the motion sensor.
i
BUZZER : Enables the buzzer if motion is detected by the motion sensor.
i
VIDEO POPUP : Enables the video popup if motion is detected by the motion sensor.
i
EMAIL : Select to send an email if motion is detected by the motion sensor.
3.
To apply the change, click <APPLy> in the bottom of the screen.
4.
when done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
\
\
Video Loss
you can specify a reaction to the case where no video is received from the camera.
1.
From <SySTEM SETUP> - <EVEnT>, select <EVEnT LOSS>.
2.
Use the [
▲▼◀▶
] buttons on the remote control or use
the mouse to specify the reaction to a video loss
i
ALARM OUT : Enables the alarm output if video
loss occurs.
i
BUZZER : Enables the buzzer if video loss occurs.
i
EMAIL : Select to send an email if video loss
occurs.
3.
To apply the change, click <APPLy> in the bottom of
the screen.
4.
when done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen. The confirmation message appears and you will return to the previous
menu.