51
\
\
Disk Operations
you can configure the DVR to delete the HDD data automatically and set the overwrite options. you can also format the
HDD.
1.
From <SySTEM SETUP> - <STORAGE>, select <DISK
OPERATIOnS>.
2.
Use the [
▲▼◀▶
/EnTER] buttons on the remote control
or use the mouse to set the operation conditions of
the disk.
i
DISK wRITE MODE
-
If it is set to <OVERwRITE>, the oldest existing
data will be overwritten by the newest recording
data. This occurrs once the HDD is full.
-
If the option is set to <OnCE> and the HDD is
full, the DVR will stop recording and beep, or
trigger a pre-defined output alarm.
i
RECORDInG TIME LIMIT : The recording data will be deleted after the specified time of reservation. If it is set to
<OFF>, this function will be disabled.
Ex) Record Time Limit : 1 day. Even if there is sufficient free space in the HDD, it records / keeps recording data for 1 day only.
i
DISK FORMAT : format the hard disk.
•
Formatting the HDD will delete all video data and logs.
3.
To apply the change, click <APPLy> in the bottom of the screen.
4.
when done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
\
\
S.M.A.R.T settings
you can check the S.M.A.R.T information of the disk and specify the check frequency.
what is S.M.A.R.T?
S.M.A.R.T (Self-Monitoring, Analysis and Report Technology) is a monitoring system used to detect and report a HDD that is likely to
cause a problem in the future.
1.
From <SySTEM SETUP> - <STORAGE>, select <S.M.A.R.T. SETUP>.
2.
Use the [
▲▼◀▶
/EnTER] buttons on the remote control
or use the mouse to check the S.M.A.R.T operation
and specify the check interval.
i
S.M.A.R.T STATUS : Read the S.M.A.R.T
information of the disk and check to display the
disk status.
Click <DETAIL InFO> to view the details.
System Setting