VT-PTZ12WH
39
MODE
INTERNAL / EXTERNAL Adjusts phase of picture with
other
PHASE
0~359 cameras in EXTERNAL mode.
EXIT (ESC TO EXIT)
3.5.
8
FACTORY DEFAULT (
MENU
=> SETUP => FACTORY DEFAULT)
Programmed data go back to initial state as ex-factory
3.5.
9
ERASE DATA (
MENU
=> SETUP => ERASE DATA)
Erase programmed data in the EEPROM of the selected dome camera. Press
MENU
or
ENTER
button to erase data,
ESC
key to exit without erasing. Origin offset value is not
affected.
CAUTION: Unless you download the data into a safe place, all the data in the selected
dome camera will be lost. (Refer to Download/ Upload data function in the
Keyboard Configuration utility)
EXIT
FACTORY DEFAULT
ARE YOU SURE : (Y/N)
YES : ENTER OR MENU KEY
NO : ESC KEY
ERASE PROGRAMMED DATA
ARE YOU SURE : (Y/N)
YES : ENTER OR MENU KEY
NO : ESC KEY
