VT-PTZ12WH
23
F- Focus - Manual/ Auto
I-Iris-Manual/Auto
B-BLC/WDR- B-BLC / W-WDR / F- OFF
X :
16 digit of preset title
-
:
not defined
█
:
Current cursor position
Follow the steps below to program the Preset positions.
1. Select the camera number by pressing
0
~
9
and
CAM
.
2. Simply press
PRST
button to enter preset menu. (
MENU
=> FUNCTIONS =>
PRESET
)
3. Select the empty preset location to be programmed by moving the
Joystick
up/down. If selected location is not empty, pressing
PRST
button will display the
predefined position.
4. You can delete by selecting and pressing the off button on the keyboard. (If
selecting an empty position, twist the joystick CCW/CW to start PTZ control for view
selection.)
5. After aiming the camera (view direction and lens control) to a specific position,
press the Focus (Near and Far) buttons. The selected location No. field will be filled
with “
A A F
”. Move the joystick to the right to manually set Focus /Iris /BLC or WDR
mode for each preset.
6. Move to the title field to edit/enter the name. Rotate the handle CW and CCW to
scroll through the alphanumeric characters. Moving the handle to right or left to
select next or previous digit.
7. To finish entering the title, move the
Joystick
up/down.
8. Locate the cursor on “
PREV NEXT”
item
to select the previous/next page of
presets, scroll through the page by moving the
Joystick
to the Left on “
PREV
NEXT”
.
9. Repeat the steps 2 through 8 for each additional preset position.
10. Select
Save and Exit
by moving the Joystick to the right. Press
ESC
to exit the
Preset menu without saving.
PRESET 01/8
NO. F I B TITLE
001 A A F xxxxxxxxxxxxxxxx
002 M M O ----------------
003 - - - ----------------
004 - - - ----------------
005 - - - ----------------
006 - - - ----------------
007 - - - ----------------
008 - - - ----------------
PREV NEXT
SAVE AND EXIT
