VT-PTZ12WH
24
NOTE: Press the Home or OFF button at programmed position to delete the
preset.
SHORTCUT TO PROGRAMMING PRESETS.
Select direction of the camera, zoom and focus to be programmed, then press No.
(
1~64
), and then press
SHFT
,
PRST
subsequently. The current view will be stored to
the selected preset number if position is empty. If selected preset number is not empty,
“PRESET EXISTING” message will be displayed on the monitor and you will be
prompted to overwrite.
Example
:
1
,
0
+
SHFT
+
PRST
will memorize current view as preset No.
10
. In this
case, focus and Iris mode will be memorized as auto and dwell time will be set to 3 sec.
3.1.3
P
ATTERN
(
MENU
=> FUNCTIONS => PATTERNS
or
Shortcut:
PTRN
)
The Pattern function memorizes and stores movement of the selected dome camera for
up to 120 seconds. Pattern can be stored in 120 seconds of total recording space.
Stored pattern is played back by pressing
No.
+
PTRN
buttons subsequently.
Follow the steps below to program the Pattern:
1. Simply press the
PTRN
key.
(
or
MENU
=> FUNCTIONS =>PATTERN)
2. Select the empty Pattern number to be programmed by moving the
Joystick
Up
or Down. If SEC column is not 000, then the selected No. of pattern is already
recorded.
3. Twist joystick CCW/CW, The pattern movement will automatically start recording
until the focus button is pressed. This procedure can be repeated to reprogram the
pattern.
4. Scroll down to the Save and Exit option and move the
Joystick
to the right to
save and exit.
PATTERN SETUP
NO. TITLE SEC
01 : xxxxxxxxxxxxxxxx 000
02 : xxxxxxxxxxxxxxxx
03 : xxxxxxxxxxxxxxxx
04 : xxxxxxxxxxxxxxxx
TOTAL : 000
SAVE AND EXIT
